ACS Applied Materials & Interfaces · 2024 · 39 citations · 38 references
Natural SciencesMaterials EngineeringMaterials ScienceBiomaterialsEnergy MaterialsPolymer ChemistryNanocompositesNanostructured Energy MaterialsAdsorbent CapacityAerogelsDesorption KineticsEnergy ConsumptionGreen AdsorbentsWater AbsorptionWater Absorption CapacityWater Desorption Kinetics
Adsorption-based atmospheric water harvesting (AWH) with solar-driven photothermal desorption has become an effective means of solving freshwater scarcity in arid regions due to its low energy consumption and high efficiency. Moisture adsorption and desorption capacities are the most critical properties in AWH, and it is a challenge to improve the rate of moisture adsorption and desorption of composite adsorbents. Therefore, this paper reports a SA/carboxymethyl chitosan (CCS)/C/CaCl 2 –U composite aerogel adsorbents with simultaneously green, low-cost, degradable, and fast hygroscopicity and desorption kinetics. The composite adsorbent used water-soluble biomass materials sodium alginate (SA) and carboxymethyl chitosan (CCS) as the backbone of the aerogel, constructed a vertically aligned unidirectional pore structure by directional freezing, and introduced nanocarbon powder and moisture-absorbent salt calcium chloride (CaCl 2 ) to improve the solar photothermal performance and water absorption, respectively. The results showed that the composite adsorbent had good water uptake capacity at 30–90% relative humidity (RH), the time to reach the water uptake of 1 g g –1 at 90% RH was only 2.5 h, and the final water uptake rate was up to 1.9 g g –1 within 12 h. Meanwhile, the composite sorbent can be heated and desorbed basically within 1 h at 80 °C and its evaporation efficiency is 1.3 times higher than that of the aerogel sorbent prepared by the conventional method when irradiated with 1000 W m –2 light intensity for 2 h. Therefore, the SA/CCS/C/CaCl 2 –U composite aerogel adsorbent of this study has a potential that can be applied in AWH due to its environmental friendliness, low cost, and faster hygroscopic desorption kinetics.
38
Water harvesting from air with metal-organic frameworks powered by natural sunlight
Hyunho Kim, Sungwoo Yang, Sameer R. Rao et al. · Science · 2017 · 1.8K citations · Full text
Engineering, Environmental Engineering, Environmental Sciences +11
Shuxian Tang, Jueying Yang, Lizhi Lin et al. · Chemical Engineering Journal · 2020 · 574 citations
Natural Sciences, Materials Engineering, Materials Science +11
Adsorption-based atmospheric water harvesting
Mojtaba Ejeian, R.Z. Wang · Joule · 2021 · 390 citations · Full text
Engineering, Environmental Engineering, Environmental Sciences +10
Jiaxing Xu, Tingxian Li, Taisen Yan et al. · Energy & Environmental Science · 2021 · 389 citations · Full text