Polymers · 2024 · 12 citations · 50 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer EngineeringPolymer MaterialsComposite MaterialsElastomeric PolymersPolymer CharacterizationPolymer CompositesPolymer ProcessingPolymer-matrix CompositesFiber-reinforced PolymersGlass Fiber Reinforced CompositesGlass Fiber Reinforced PolymersGlass Fiber ReinforcementImpact StrengthPolypropyleneThermal PropertiesThermoplastic Elastomers
A cost-effective solution to the problems that the automotive industry is facing nowadays regarding regulations on emissions and fuel efficiency is to achieve weight reduction of automobile parts. Glass fiber-reinforced polymers are regularly used to manufacture various components, and some parts may also contain thermoplastic elastomers for toughness improvement. This work aimed to investigate the effect of styrene-(ethylene-co-butylene)-styrene triblock copolymer (E) and treated fly ash (C) on the morphological, thermal, and mechanical properties of long glass fiber (G)-reinforced polypropylene (PP). Results showed that the composites obtained through melt processing methods presented similar thermal stability and improved (nano)mechanical properties compared to 25-30 wt.% G-reinforced PP composites (PP-25G/PP-30G). Specifically, the impact strength and surface hardness were greatly improved. The addition of 20 wt.% E led to a 25-39% increase in impact strength and surface elasticity, while the addition of 6.5 wt.% C led to a 16% increase in surface hardness. The composite based on 25 wt.% G, 6.5 wt.% C, and 20 wt.% E presented the best-balanced properties (8-17% increase in impact strength, 38-41% increase in axial strain, and 35% increase in surface hardness) compared with PP-30G/PP-25G. Structural and morphological analysis confirmed the presence of a strong interaction between the components that make the composites. Based on these results, the PP-G-E-C composites could be presented as a viable material for automotive applications.
50
Fly ash characterization by SEM–EDS
Barbara Kutchko, A‐Young Kim · Fuel · 2006 · 648 citations
Polymeric Nanocomposites for Automotive Applications
Juan M. Garcés, D. J. Moll, Jozef Bicerano et al. · Advanced Materials · 2000 · 396 citations
Natural Sciences, Materials Engineering, Materials Science +17