Materials & Design · 2024 · 18 citations · 68 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysDuctilityMetalsPowder Bed FusionPowder MetallurgyStrengthening MechanismsEnergy DensityLaser Powder Bed FusionMetal Powder Bed FusionMolecular Dynamics CouplingParticle-reinforced CompositesStrength-ductility BalanceStrengtheningTwinning
In this study, Fe60(CoCrNiMn)40 medium-entropy alloy (MEA) was fabricated by laser powder bed fusion (LPBF) via mixing of pure Fe and FeCoCrNiMn powders, the processability, microstructure and mechanical properties were systematically investigated, and the mechanism of strengthening and toughening were revealed through combination of experiments and molecular dynamics (MD) simulations. Results show that fraction of BCC phase decreased gradually with increasing volume energy density (VED), and thus heterostructue with varying FCC and BCC phases were produced through regulating the VED. The Fe60(CoCrNiMn)40 MEA (with scanning speeds of 700 and 800 mm/s) showed excellent strength-plasticity balance (e.g. 476 MPa, 612 MPa and 63 %) compared to the equiatomic FeCoCrNiMn HEA, which is ascribed to the synergistic strengthening and toughening effects involving the twinning induced plasticity (TWIP) and the reinforcement caused by the BCC phase (act as reinforced particle) embedded in the FCC matrix.
68
Physics and phenomenology of strain hardening: the FCC case
U.F. Kocks, H. Mecking · Progress in Materials Science · 2002 · 3.2K citations