Results in Engineering · 2024 · 18 citations · 51 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysFatigueFracture MechanicsMicrostructure ControlSteel MaterialsWork HardeningAustemperingBainitic SteelsCrack GrowthFatigue Crack GrowthFatigue Crack PropagationMechanical PerformanceRetained AusteniteTensile Strength
AISI 4140 steel under annealing conditions was subjected to single- and multi-austempering heat treatments. The mechanical performance of the compact tension (CT) specimens was evaluated via axial tensile tests and fatigue crack growth (FCG) tests. The single-austempered steel showed a significant increase in its tensile strength with a gradual reduction in the elongation as the temperature decreased. However, the multi-austempered steel had a higher tensile strength than the single-austempered steel at 362 °C and 412 °C. The FCG performance of the austempered steel at 362 °C had the highest number of cycles compared to those of the austempered steel at 312 °C and 412 °C; additionally, the multi-austempered steel underwent more cycles than those of the steel under single-austempering conditions at 312 °C and 412 °C. The bainitic structure with a larger martensitic austenite (MA) island and greater thickness of the retained austenite (RA) in the microstructure of austempered steel at 362 °C provided the optimum mechanical properties in terms of higher tensile strength and the highest fatigue crack growth resistance. The intergranular fracture in the pyramidal like-morphology of BF, the cracking of the larger MA islands, the more ductile fracture of RA, and the steel under multi-austempering conditions are the main reasons for the highest fatigue crack growth resistance compared to steel austempered at 312 °C and 412 °C.
51