Journal of Materials Research and Technology · 2024 · 14 citations · 29 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMetallurgyPhase TransformationsAlloysCrystallization ProcessesGrain RefinementMetalsMetastable PhasesMicrostructure EvolutionAnnealingBeta Titanium AlloysDeformationGrain Size ReductionMetastable Alloy PhasesMicrostructureRollingTitanium Alloys
In order to reduce the deformation resistance, the rolling process of metastable β titanium alloys is generally carried out in the β single-phase state, which causes the problem of non-uniform grain size during the subsequent annealing process, thus affecting the alloy properties. Here we first solution-treated the as-cast Ti–15Mo–3Al-2.7Nb-0.2Si alloy at 740 °C to obtain α + β phase, then cold rolled it with a reduction of 60 %, and finally annealed it at 710–810 °C for 2–240min. Characterization of the annealed metastable β alloy revealed that α phase was involved in the rolling deformation at the same time and recrystallized on the β matrix during the subsequent annealing process, known as equiaxial dispersion, which impeded the recrystallization of the β grains, and ultimately an ultrafine crystalline microstructure of α + β phases with an average grain size of less than 2 μm was obtained.
29
Perspectives on Titanium Science and Technology
D. Banerjee, J C Williams · Acta Materialia · 2013 · 2.9K citations
Natural Sciences, Materials Engineering, Materials Science +10
Ke Huang, Knut Marthinsen, Qinglong Zhao et al. · Progress in Materials Science · 2017 · 768 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17