Chinese Journal of Aeronautics · 2024 · 20 citations · 39 references
EngineeringMaterials EngineeringMechanical EngineeringMaterials CharacterizationMechanical Behavior Of MaterialsTribologyCoatingsLubrication EngineeringPhysical Vapor DepositionTribological MaterialsWear ResistanceWear-resistant MaterialsElastohydrodynamic LubricationFriction Loss ReductionLubricationPhysical Vapor Deposition CoatingsPvd CoatingsWearWear-resistant CoatingsWear-resistant Surfaces
The cylinder block/valve plate interface is one of the most critical frictional interfaces of the swashplate-type axial piston pump. However, the poor lubrication interface caused rapid wear and high friction loss in an elastohydrodynamic lubrication system, decreasing the pump lifetime. Wear resistant bronze coatings were fabricated on 38CrMoAl substrate by Physical Vapor Deposition (PVD) and Chemical Vapor Deposition (CVD), respectively. Ball-on-disc wear tests were performed to comparatively investigate the wear behaviors of the coatings and bulk ductile iron samples. It can be found that the PVD-bronze coating exhibited better wear resistance than the other two samples. This enhanced wear resistance was attributed to the unique composite microstructure and desired mechanical strength, which could resist to mechanical shear and spallation, decreasing friction loss. The appropriate hardness of (1.33 ± 0.07) GPa could be beneficial for enhancing its wear resistance. The PVD-bronze coating possessed a much lower and stable coefficient of friction (about 0.1) and wear rate (about 6 μm3·N-1·m-1) under the loading forces of about 100 N after 20 min. The wear mechanism was the abrasive wear.
39
Jiangao Zhao, Yongling Fu, Jiming Ma et al. · Chinese Journal of Aeronautics · 2020 · 85 citations · Full text
Engineering, Mechanical Engineering, Hydraulic Engineering +15