Production Engineering · 2024 · 11 citations · 14 references
EngineeringIndustrial EngineeringManufacturing EngineeringInstrumentationProcess ControlSensorsIndustrial InstrumentationMechanical SensorsProcess InstrumentationSoft SensorsThermal SensorsThermomechanical ProcessingBarkhausen NoiseGrindingIn-process SensingNon-destructive TestingProcess InspectionSoft SensingThermo-mechanical EffectsThermo-mechanical Stress
Abstract After grinding of hardened workpieces, especially in case of safety-relevant components, usually non-destructive testing is carried out to detect thermo-mechanical damages in the surface layer. In-process detection methods allow a fast reaction to negative changes before producing a large amount of rejects and open the possibility to save additional time for post-process inspection. However, these are not industrially used yet, since boundary conditions and application limits are not defined so far. This study shows the potential of a grinding process control based on a soft sensor combining a thermal limit in a $${P}_{c}^{{\prime}{\prime}}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msubsup> <mml:mi>P</mml:mi> <mml:mrow> <mml:mi>c</mml:mi> </mml:mrow> <mml:mrow> <mml:mo>′</mml:mo> <mml:mo>′</mml:mo> </mml:mrow> </mml:msubsup> </mml:math> − Δt-diagram and magnetic Barkhausen noise analysis applied in-situ during grinding (BN). The specific grinding power $${P}_{c}^{{\prime}{\prime}}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msubsup> <mml:mi>P</mml:mi> <mml:mrow> <mml:mi>c</mml:mi> </mml:mrow> <mml:mrow> <mml:mo>′</mml:mo> <mml:mo>′</mml:mo> </mml:mrow> </mml:msubsup> </mml:math> in dependence of the contact time Δt allows to identify/avoid grinding burn starting from light tempering zones. Furthermore, the BN is well suited for the detection of detrimental residual stress changes (tensile) occurring even before tempering zones are generated. The developed process control based on this combination optimizes the process parameters to prevent negative thermo-mechanical surface changes while keeping the productivity of the process as high as possible. The applicability is demonstrated for external cylindrical and non-circular grinding processes. Due to the radius varying over the workpiece circumference, the latter ones require special demands on signal evaluation, resolution and control speed.
14
S. Malkin, Changsheng Guo · CIRP Annals · 2007 · 581 citations
Engineering, Manufacturing Engineering, Mechanical Engineering +12
Advances in Modeling and Simulation of Grinding Processes
E. Brinksmeier, Jan C. Aurich, Edvard Govekar et al. · CIRP Annals · 2006 · 453 citations
Engineering, Industrial Engineering, Manufacturing Engineering +10
A systematic approach for soft sensor development
Bao Lin, Bodil Recke, Jørgen Knudsen et al. · Computers & Chemical Engineering · 2006 · 337 citations
Interactions of grinding tool and supplied fluid
Carsten Heinzel, Benjamin Kirsch, Daniel Meyer et al. · CIRP Annals · 2020 · 38 citations
Engineering, Manufacturing Engineering, Mechanical Engineering +8