Building a Flexible and Highly Ionic Conductive Solid Electrolyte Interphase on the Surface of Si@C Anodes by Binary Electrolyte Additives

Abstract

Si@C as a high specific capacity anode material for lithium batteries (LIBs) has attracted a lot of attention. However, the severe volume change during lithium de-embedding causes repeated rupture/reconstruction of the solid electrolyte interphase (SEI), resulting in poor cycling stability of the Si-based battery system and thus hindering its application in commercial batteries. Using electrolyte additives to form an excellent SEI is considered to be a cost-effective method to meet this challenge. Here, the classical film-forming additive vinyl carbonate (VC), and the newly emerging lithium salt additive lithium difluorophosphate (LiDFP), are chosen as synergistic additives to improve the electrode-electrolyte interface properties. Final results show that the VC additive generates flexible polycarbonate components at the electrode/electrolyte interface, preventing the fragmentation of Si particles. However, the organic components show high impedance, inhibiting the fast transport of Li⁺. This defect can be supplemented from the decomposition substances of the LiDFP additive. The derived inorganic products, such as LiF and Li₃PO₄, can strengthen the reaction kinetics of the electrode, reduce the interfacial impedance, and promote the Li⁺ transport. Thus, the synergistic effect of VC and LiDFP additives builds an effective SEI with good flexibility and high ionic conductivity and then significantly improves the cycling and rate stability of Si@C anodes. The experimental results show that the utilization of LiDFP and VC additives to modify the Si@C anode interface enhances the capacity retention of the Si@C/Li half-cell after 100 cycles from 68.2% to 85.1%. Besides, the possible mechanism of action between VC and LiDFP is proposed by using the spectral characterization technique and density functional theory (DFT) calculations. This research opens up a new possibility for improvement of SEI, and provides a simple way to achieve high-performance Si-based LIBs.