Structural Health Monitoring of Fiber-Reinforced Concrete Prisms with Polyolefin Macro-Fibers Using a Piezoelectric Materials Network under Various Load-Induced Stress

Abstract

This experimental study investigates the influence of synthetic macro-fibers added in fiber-reinforced concrete (FRC) prismatic specimens on their flexural response and overall cracking performance. Application of a novel structural health monitoring (SHM) system that implements the electromechanical impedance (EMI) technique and the use of piezoelectric lead zirconate titanate (PZT) transducers installed in the FRC prisms are also included. The applied PZT-enabled EMI-based monitoring system was developed to diagnose damage and the overall performance in reinforced concrete (RC) structural members subjected to cyclic repeated loading, simulating seismic excitations in existing RC buildings. The paper also aims to determine the sensitivity of the real-time, wireless, and portable monitoring technique corresponding to the location, the distance, the direction of polarization of the PZT transducers and the location and magnitude of damage due to flexural cracking. Further, the influence of the effect of stresses corresponding at various loading levels and the observed changes in the ΕΜΙ frequency response of the PZT transducers are also examined. Test results indicated that cracking detection is achieved using this SHM system by prompt damage level assessment due to the FRC’s flexural load at early seismic loading stages in existing RC buildings.