Additive Strategy Enhancing In Situ Polymerization Uniformity for High‐Voltage Sodium Metal Batteries

Abstract

In situ polymerization to prepare quasi-solid electrolyte has attracted wide attentions for its advantage in achieving intimate electrode-electrolyte contact and the high process compatibility with current liquid batteries; however, gases can be generated during polymerization process and remained in the final electrolyte, severely impairing the electrolyte uniformity and electrochemical performance. In this work, an in situ polymerized poly(vinylene carbonate)-based quasi-solid electrolyte for high-voltage sodium metal batteries (SMBs) is demonstrated, which contains a novel multifunctional additive N-methyl-N-(trimethylsilyl)trifluoroacetamide (MSTFA). MSTFA as high-efficient plasticizer diminishes residual gases in electrolyte after polymerization; the softer and homogeneous electrolyte enables much faster ionic conduction. The HF/H₂ O scavenge effect of MSTFA mitigates the corrosion of free acid to cathode and interfacial passivating layers, enhancing the cycle stability under high voltage. As a result, the 4.4 V Na||Na₃ V₂ (PO₄ )₂ F₃ cell employing the optimized electrolyte possesses an initial discharge capacity of 112.0 mAh g^-1 and a capacity retention of 91.3% after 100 cycles at 0.5C, obviously better than those of its counterparts without MSTFA addition. This work gives a pioneering study on the gas residue phenomenon in in situ polymerized electrolytes, and introduces a novel multifunctional silane additive that effectively enhances electrochemical performance in high-voltage SMBs, showing practical application significance.