Physica Scripta · 2023 · 10 citations · 32 references
EngineeringMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMaterials ProcessingCeramic CompositesComposite MaterialsComposites ManufacturingReinforcement MaterialsSinteringWear ResistanceExothermic Peak TemperatureExothermic TransitionsHardnessMass Loss RatesMechanical Properties Of Ceramic CompositesMicrowave SinteringOxide Ceramic CompositesSintering Of Ceramic Composites
Abstract The manufacturing of a composite material out of aluminium (Al) and yttrium oxide (Y 2 O 3 ) was achieved via the use of the microwave hybrid sintering method, which is an energy-efficient and eco-friendly production process. Compression and dry reciprocating wear tests are conducted on the manufactured material to learn more about the function of reinforcing particles in composites. The exothermic temperature marginally shifts (1 °C) when Y 2 O 3 reinforcement is added to the Al matrix. The average micro hardness of composites with 2 wt.% Y 2 O 3 is 43 Hv, which is an improvement over the previous value of 36 Hv. In addition, the composite material’s compressive strength improved by 38.78% in comparison to that of Al. In a dry reciprocating wear test, the composite material with 2 wt% Y 2 O 3 nanoparticle showed a reduction in mass loss of 20%. The even distribution of reinforcing components throughout the material and the advent of intermetallic Al 3 Y in composites are likely responsible for this.
32
Full sintering of powdered-metal bodies in a microwave field
Rustum Roy, Dinesh Agrawal, Jiping Cheng et al. · Nature · 1999 · 862 citations
Andreas Mortensen, Javier LLorca · Annual Review of Materials Research · 2010 · 463 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +14