Results in Engineering · 2023 · 36 citations · 43 references
EngineeringCivil EngineeringBlastingBuilding StructuresStructural EngineeringBlast DesignConcrete ConstructionNonlinear Structural AnalysisReinforced Concrete StructuresSlab SystemsStructural Response AnalysisBlast ImpactBlast Loading ResponseBlast Resistant DesignBlast SimulationFinite Element SimulationReinforced ConcreteStructural Response To Air BlastStructural Response To Blasting
Civilian buildings exposed to blast loading suffer irrecoverable damage and casualties, and ASCE Blast‑Resistant provides equations for explosive bursts while Abaqus employs a TNT‑equivalent mass method. The study evaluates the analytical and numerical performance of concrete slabs reinforced with conventional steel rebars and perforated steel plates, using ASCE Blast‑Resistant guidelines and Abaqus finite element analysis, and compares perforated plates to rebars as an alternative reinforcement. Analytical determination of the nonlinear response of a rectangular slab with conventional rebars per ASCE Blast‑Resistant was followed by numerical simulations of square and rectangular slabs in Abaqus, validated against literature, to assess reinforcement performance. Simulation results matched analytical predictions, confirming that Abaqus’s equivalent mass method accurately captures slab behavior, and that replacing rebars with equal‑volume perforated plates reduces maximum displacement by up to 20% and shortens the post‑shock wavelength.
Civilian buildings have been imposed to blast loading, resulting in irrecoverable damages and casualties. This paper studies the analytical and numerical performance of concrete slabs reinforced by Conventional Steel Rebars and Perforated Steel Plates based on the values recommended by ASCE Blast-Resistant and nonlinear Finite Element Analysis performed in Abaqus. ASCE Blast-Resistant proposes the equations covering the burst of any explosive materials, while Abaqus uses the TNT equivalent mass method. This study uses PSP as an alternative to CSR in concrete slabs because PSPs are more integrated with surrounding concrete than CSRs due to the particular geometry of the holes. In the analytical phase, based on ASCE Blast-Resistant, the nonlinear performance of the rectangular concrete slab reinforced with CSR under blast loading was determined. Then, in the numerical step, the square concrete slab reinforced with CSR subjected to blast loading was simulated and verified with the literature results. Furthermore, a nonlinear finite element simulation of the rectangular concrete slab was performed to validate the modeling. Moreover, the simulation results of the rectangular slab were compared with the analytical results calculated based on ASCE Blast-Resistant, revealing that the equivalent mass method used in Abaqus accurately simulates the behavior of the reinforced concrete slab under blast loading. Finally, CSRs were replaced by PSPs with an equal volume in the rectangular concrete slab to compare their performance showing that PSPs with equal volume compared to CSRs can reduce the reinforced concrete slab's maximum displacement by up to 20% and decrease its following wavelength.
43