Materials & Design · 2023 · 17 citations · 27 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsNanomaterialsNanotechnologyMicrostructure - Property RelationshipsNanomechanical PropertiesNanomechanicsNanoporous MaterialsNanoscale MaterialsStress-strain BehaviorDeformationElastic ModulusFlow StressMechanical Properties Of NanomaterialsMicromechanical TestingSize EffectsSize-dependent Mechanical BehaviorSize-dependent Mechanical Properties
In this study, the consequence of intrinsic and extrinsic size effects on mechanical responses of nanoporous gold is investigated via microcompression testing. By varying the micropillar diameter (D) between 1 µm and 20 µm and the ligament size (L), 50 nm and 350 nm, a critical ratio (α = D/L = 20) was found, above which the test structure can be considered a representative volume element, resulting in identical mechanical response and uniform deformation. Below that value, both flow stress and elastic modulus decrease with decreasing pillar diameter, as evidenced for a measurement series with a fixed ligament size of 350 nm where the flow stress decreased by more than 50% (from approximately 5 to 2.5 MPa) and the elastic modulus was reduced from approximately 0.5 GPa to almost zero. Stochastic behavior along with non-uniform deformation and failure is observed for α < 10, suggesting that the size of the load-bearing units in this material is about 10 times the corresponding ligament size.
27
Sample Dimensions Influence Strength and Crystal Plasticity
Michael D. Uchic, Dennis M. Dimiduk, J.N. Florando et al. · Science · 2004 · 2.3K citations
Natural Sciences, Materials Engineering, Materials Science +17