The influence of kaolin shape factor on the stiffness of coated papers

J.C. Husband, L. F. Gate, Navid Norouzi, David E. Blair

TAPPI Journal · 2009 · 16 citations · 5 references

Concepts

Abstract

The mechanical properties of paper coating layers are very important in converting and printing operations. These include stiffness, resistance to fold cracking, dusting and pick resistance. In this study, researchers prepared unsupported coating layers and measured the in-plane tensile properties as a function of the kaolin particle aspect ratio. The results have then been compared with those from pilot coated papers containing the same clays. Kaolin-based coating layers differ from those based on ground calcium carbonate because of the platy nature of the clay particles. This gives different mechanical properties in the x-, y-, and z-directions. This research shows that a coating layer containing high-aspect-ratio fine clay has an elastic modulus seven or eight times greater than one containing only ground calcium carbonate. With appropriate binder systems, these layers can have a modulus which is of the same magnitude as that of the base paper. It is shown here that this improvement can be used advantageously to increase stiffness or to decrease basis weight to reduce cost while maintaining stiffness.

References

5