SnF₂‐Induced Highly Current‐Tolerant Solid Electrolytes for Solid‐State Sodium Batteries

Abstract

Abstract Solid‐state sodium batteries have garnered considerable interest. However, their electrochemical performance is hampered by severe interfacial resistance between sodium metal and inorganic solid electrolytes, as well as Na dendrite growth within the electrolytes. To address these issues, a uniform and compact SnF 2 film is first introduced onto the surface of the inorganic solid electrolyte Na 3.2 Zr 1.9 Ca 0.1 Si 2 PO 12 (NCZSP) to improve contact through an effective and straightforward process. Through experiments and computations, the in situ conversion reaction between SnF 2 and molten Na is adequately confirmed, resulting in a composite conductive layer containing Na x Sn alloys and NaF at the interface. As a result, the interfacial resistance of Na/NCZSP is significantly decreased from 813 to 5 Ω cm 2 , and the critical current density is dramatically increased to 1.8 mA cm −2 , as opposed to 0.2 mA cm −2 with bare NCZSP. The symmetric cell is able to cycle stably at 0.2 mA cm −2 for 1300 h at 30 °C and exhibits excellent current tolerance of 0.3 and 0.5 mA cm −2 . Moreover, the Na 3 V 2 (PO 4 ) 3 /SnF 2 ‐NCZSP/Na full cell displays excellent rate performance and cycling stability. The SnF 2 ‐induced interlayer proves significant in improving interfacial contact and restraining sodium dendrite propagation, thus promoting the development of solid‐state sodium batteries.