Crystals · 2023 · 10 citations · 16 references
Natural SciencesMaterials EngineeringMaterials ScienceNanomaterialsSurface EngineeringSurface ScienceMetal Oxide NanomaterialsMetalsNanomaterial CharacterizationNanoparticle CharacterizationNanostructured SurfacesNanotubesAdhesion StrengthAnodic OxidationAnodizationCritical Load AnalysisOxidation Of Titanium AlloysSubstrate AdhesionTitanium AlloysTitanium Oxides
In this work, titanium oxide nanotubes (TNTs) were formed by anodic oxidation on the surface of a Ti–6Al–4V alloy. An electrolyte based on ethylene glycol (EG) and ammonium fluoride (NH4F) was used. Different anodizing periods (10, 20, 30, 40, 50, and 60 min) with a constant potential of 60 V were established. The morphology of the TNT array was observed by scanning electron microscopy (SEM). The adhesion strength of the TNTs to the Ti–6Al–4V surface was evaluated using nanoscratch tests. The critical load of the different TNT layers was determined from the analysis of the groove of the nanoindenter path. It ranged from 0 mN for the samples exposed to 10 min of anodization to 47.0 ± 3.0 mN for samples exposed to 50 min. These results indicate the TNT layers formed at 50 min presented the best substrate adhesion among the specimen tested.
16
Scratch adhesion testing of hard coatings
A.J. Perry · Thin Solid Films · 1983 · 324 citations
Natural Sciences, Materials Engineering, Materials Science +14
Jan M. Macák, Hiroaki Tsuchiya, Luciano Taveira et al. · Journal of Biomedical Materials Research Part A · 2005 · 258 citations
Natural Sciences, Materials Engineering, Materials Science +17