Processes · 2023 · 18 citations · 49 references
EngineeringAgricultural EngineeringBiosystems EngineeringAgricultural Processing EngineeringReaction EngineeringSoil Organic MatterBiochar ProductionBioenergy SystemsBiofuel ProductionBiomass ConversionBiomass Energy SystemsRenewable FeedstocksBiochar MaterialsBiochar YieldBiomass CharacterizationBiomass Feedstock SelectionCarbon YieldFeedstock SelectionFuel Heating ValueProcess Temperature Effects
This study aimed to produce biochar with an energy value in the range of sub-bituminous carbon by investigating the effect of oxidative and non-oxidative torrefaction on the torrefaction yield and fuel properties of wheat straw. Three independent variables were considered at different levels: temperature (230, 255, 280, 305 °C), residence time (20, 40, 60 min), and reaction atmosphere (0, 3, 6 vol% O2; N2 balance); and three dependent variables: mass yield, energy yield, and percentage increase in higher heating value (HHV). The results showed that it is possible to produce a sub-bituminous carbon type C biochar using oxidative torrefaction, significantly reducing time and temperature compared with non-oxidative torrefaction. The optimum torrefaction conditions were 287 °C–20 min–6.0% O2, which increased the HHV of wheat straw from 13.86 to 19.41 MJ kg−1. The mass and energy yields were 44.11 and 61.78%, respectively. The physicochemical and fuel properties of the obtained biochar were improved compared with the raw biomass. The atomic O/C ratio was reduced from 1.38 to 0.86. In addition, the hydroxyl groups in the lignocellulosic structure decreased and the hemicellulose content decreased from 26.08% to 1.61%. This improved grindability, thermal stability, porosity, and hydrophobicity.
49
An investigation of the grindability of two torrefied energy crops
Toby Bridgeman, J.M. Jones, A. Williams et al. · Fuel · 2010 · 312 citations
Agriculture, Agronomy, Agricultural Processing Engineering +2