Energy and Built Environment · 2023 · 12 citations · 34 references
EngineeringCivil EngineeringComputational Fluid DynamicsHeat TransferHydraulic EngineeringPipe FlowPipeline SystemsWater FlowCritical FlowCritical Flow RateCritical VelocityHeat Pump System ModelingHorizontal Pipe FlowIce Flow DynamicsIce-water Interface FlowWater Source Heat Pumps
The traditional evaporator of water source heat pump system is easy to freeze when the water source temperature is too low in winter. A novel ice source heat pump system is proposed, which can use low temperature surface water to supply heat to buildings. One of the key problems for safe transportation is velocity range of ice slurry in ice outlet pipeline. In order to study the critical flow velocity of ice slurry in the pipe, an Euler model of horizontal straight pipe and 90° elbow pipe were established by Fluent software. The influence of five factors on the critical flow velocity of two kinds of pipes, including initial ice packing fraction, ice particle size, pipe diameter, length of straight pipe and radius curvature of elbow was studied. It found that the initial ice content should be controlled from 10% to 15%. The inlet flow rate was 20% higher than the critical flow rate under the most unfavorable condition. Ice particle size was less than 0.2 mm. The total length of ice discharge pipeline was less than 50 m. Curvature radius of the bend should be met the minimum requirements of the specification of the pipe used.
34
M Kauffeld, M.J. Wang, Vladimir Mikhailovich Gol'dstein et al. · International Journal of Refrigeration · 2010 · 250 citations · Full text
Heat transfer and pressure drop in ice-water slurries
B. D. Knodel, David M. France, Ung-Kyu Choi et al. · Applied Thermal Engineering · 2000 · 107 citations
Engineering, Chemical Engineering, Mechanical Engineering +12