Polymer Engineering and Science · 2023 · 16 citations · 56 references
Natural SciencesChemical EngineeringChemistryBiomaterialsPolymer ChemistryWater TreatmentAdsorption ProcessesAdsorptive SeparationsGelsHydrogel BiomaterialsHydrogelsSurface AdsorptionAdsorption CapacityAdsorption IsothermsAdsorption Of DyesAdsorption PhenomenaChitosanLangmuir Adsorption ModelMonolayer AdsorptionRemoval Efficiency
Abstract O ‐Carboxymethyl chitosan ( O ‐CM‐chitosan) hydrogel, prepared in our previous study, was investigated in this work for the first time as adsorbent for Basic Red 12 (BR 12) dye. With rising temperature (from 25°C to 55°C) and decreasing solution pH (from 9 to 4), a lowering in both adsorption capacity (from 703.47 to 400.79 mg/g) and removal efficiency (from 70.34% to 40.08%) was observed. A significant increase in adsorption capacity (from 342.75 to 621.39 mg/g) was observed with increasing initial dye concentration (from 400 to 1000 mg/L), while a decrease in removal efficiency (from 85.69% to 62.14%) was noted. Pseudo‐second‐order model fitted well the adsorption. Isotherms of adsorption conform to Langmuir model with a maximum monolayer adsorption capacity of 625 mg/g. The value of ∆H° (−23.99 kJ/mol) implied exothermic nature of adsorption process. Values of Δ G° indicated that the adsorption was spontaneous at low temperature and nonspontaneous at high temperature. The value of activation energy is equal to 13.071 kJ/mol. The dye removal percentage from the hydrogel was 88% at the first cycle. Thus, O ‐CM‐chitosan hydrogel has promising and effective properties for removing BR 12 and similar dyes from aqueous media.
56