Energy & Fuels · 2023 · 41 citations · 55 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemical EngineeringElectrochemistryEnergy MaterialsAnode MaterialsBattery TechnologyElectrochemical Energy StorageElectrode MaterialsEnergy StorageEnergy Storage MaterialsCarbon-based AnodesChemical ActivationCoulombic EfficiencyCurrent DensityHard Carbon AnodesHigh-capacity Anode MaterialsRate CapabilitySodium-ion Batteries
High Resolution Image Download MS PowerPoint Slide The present study reports the promising potential of waste hemp-hurd-derived carbons as anodes in sodium-ion batteries (SIBs). Carbons were produced through an easily scalable process consisting of pyrolysis of raw biomass at 500 °C followed by mild chemical activation of the resulting char through wet impregnation with K 2 CO 3 and subsequent heating of the solid phase (after filtration and drying) up to 700 or 800 °C under nitrogen. The best electrochemical performance was observed for the hard carbon activated at a char-K 2 CO 3 mass ratio of 1:4 and heated up to 800 °C, which exhibited an excellent initial coulombic efficiency (73%) and achieved reversible charge capacities of 267 and 79 mAh g –1 at 0.03 and 1 A g –1, respectively. This material also exhibited an impressive cyclic stability and rate capability, with a capacity retention of 96% after 300 cycles at a current density of 2 A g –1 . This more than satisfactory performance could be related to the textural and structural features of the hard carbon, which include moderate interconnected microporosity (with pore sizes below 1 nm), an appropriate concentration of defects in the carbon structure, relatively large interplanar distances, and a certain number of closed pores.
55