Emerging Science Journal · 2023 · 36 citations · 38 references
EngineeringChemical EngineeringBiochemical EngineeringCatalysisReaction EngineeringBiofuel ProductionBiomass ConversionBioreaction EngineeringCatalytic Reaction EngineeringProduction OptimizationTaguchi MethodsBiodieselBiodiesel FeedstocksBiodiesel ProductionBiomass CharacterizationBiomass Conversion CatalysisSignal-to-noise RatioSignal-to-noise Ratio AnalysisTaguchi Designs
Biodiesel production using novel glycerol and potassium carbonate-based catalysts has not been developed under the Taguchi technique. This study aims to determine the most influential parameter in biodiesel production from refined bleach-deodorized palm oil (RBDPO) using DES K2CO3-Glycerol as the novel catalyst. The raw material was subjected to transesterification at the desired reaction parameters estimated by the orthogonal 16-run (L16) approach with 2 levels and 4 factors of the Taguchi technique. Signal-to-noise ratio (SNR) and ANOVA were used to confirm the predicted value. From the results, the catalyst is the most influential variable in the TG value of biodiesel, placed in the first rank of the influence factor. Biodiesel production with a minimum total glycerol value (0.210%) using DES K2CO3-Glycerol as a catalyst is most optimally produced at 95 °C for 4 h and 400 rpm using 30 wt% methanol and 4 wt% catalysts achieved by the Taguchi technique. The biodiesel obtained from RBDPO complies with the required international standards. Doi: 10.28991/ESJ-2023-07-03-018 Full Text: PDF
38
Deep Eutectic Solvents: Physicochemical Properties and Gas Separation Applications
Gregorio García, Santiago Aparício, Ruh Ullah et al. · Energy & Fuels · 2015 · 1.1K citations · Full text
Kaveh Shahbaz, Saeid Baroutian, Farouq S. Mjalli et al. · Thermochimica Acta · 2011 · 356 citations
Natural Sciences, Materials Engineering, Materials Science +5