Journal of Materials Research and Technology · 2023 · 39 citations · 35 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials ChemistrySurface ChemistrySurface ScienceCoating ProcessesCoatingsSilicon MaterialsSubstrate PreparationSurface CoatingsSurface KineticsActivation EnergyGrowth KineticsSilicide CoatingsSurface Formation MechanismsSurface Microstructure EvolutionTemperature Effects On DepositionThin-film Growth KineticsThin-film Growth Mechanisms
A Si-rich NbSi2 coating was prepared on Nb substrate by hot dip silicon plating process, which mainly consists of Nb5Si3 interfacial layer, NbSi2 intermediate layer and silicon-rich NbSi2 outer layer. The Si-rich NbSi2 coating has flat surface and dense structure, and the surface roughness is only 0.218–0.548 μm. Raising the deposition temperature can also significantly increase the growth rate of the Si-rich NbSi2 coating. The hot-dip silicon plating process has an extremely low reaction activation energy (249.99 kJ mol−1), which indicates that there are a large number of activated molecules during hot dip silicon plating. The silicon atoms in the molten bath deposited on the Nb surface and maintained a high chemical potential gradient continuously. Therefore, the solid diffusion reaction of Nb–Si was continuous, and the Nb5Si3 phase was generated and consumed continuously, and transformed into NbSi2 phase, which led to a higher growth rate of coating (1.7 × 10−13 to 4.3 × 10−13 m2 s).
35
On the oxidation mechanism of niobium-base in situ composites
Stéphane Knittel, Patrice Berthod, S. Mathieu et al. · Corrosion Science · 2012 · 153 citations
Natural Sciences, Materials Engineering, Materials Science +11