ACS Applied Optical Materials · 2023 · 11 citations · 37 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsInorganic ChemistryOptical MaterialsCrystal ChemistryFluorescence SpectroscopyLuminescent MaterialsNear-infrared ImagingOptical SpectroscopyRare-earth-doped MaterialsExcitationFull Width At Half MaximumNear-infrared EmissionPhosphorescent MaterialsPhosphorsRare-earth-doped Luminescent MaterialsSpectral Line BroadeningThermal Stability
Near-infrared phosphor-converted light-emitting diodes (NIR pc-LEDs) play an important role in nondestructive testing, medical imaging, food analysis, and so on. Broadband NIR phosphors are needed in order to cover the characteristic wavelengths of various matters. In this paper, a NIR phosphor, Sr 0.92 Mg 0.91 Al 10.1 O 17 (SMAO):Cr 3+, with a full width at half maximum (FWHM) of 12–102 nm is achieved as a function of Cr 3+ concentration. Two Cr 3+ sites are observed by means of excitation spectra and fluorescence decay curves. The spectral broadening with the increase of Cr 3+ concentration is attributed to the increase of occupation ratio on the weak crystal field site by Cr 3+ . In addition, the difference in thermal stability between 2 E and 4 T 2 is employed to conduct the temperature measurement with a relative sensitivity of 0.43% K –1 at 270 K. A NIR pc-LED is fabricated using SMAO:0.03Cr 3+ phosphor combined with a 395 nm LED chip with radiation flux of 2.2 mW@10 mA and 15 mW@100 mA.
37
Divalent europium-doped near-infrared-emitting phosphor for light-emitting diodes
Jianwei Qiao, Guojun Zhou, Yayun Zhou et al. · Nature Communications · 2019 · 647 citations · Full text