Heliyon · 2023 · 35 citations · 29 references
Natural SciencesMaterials EngineeringMaterials ScienceAdditive ManufacturingPolymer MaterialsStructural Materials3D PrintingComposite MaterialsHybrid Additive ManufacturingHybrid FabricationPolymer CompositesPolymer-based Construction MaterialsFiber-reinforced PolymersGlass Fiber Reinforced CompositesGlass Fiber Reinforced PolymersHybrid Material SystemsPolylactic Acid MaterialsReinforcementTensile StrengthTensile Strength Testing
The figure eight model was successfully manufactured, analyzed, and characterized in the present study. The model was manufactured via 3D printing fused deposition modelling (FDM) and then reinforced with glass fiber-reinforced polymers (GFRP). There are three different designs in figure eight that are examined, and each design is made using 3D printing FDM and coated with GFRP, a hybrid material, as shown. Specimens that have been made from each design are then evaluated by tensile test, hardness test, surface roughness test, and density test. The results showed that the hybrid figure eight lamination with polylactic acid (PLA) and GFRP material could increase the tensile strength by more than two times higher. The highest tensile strength lies in design 1 with 4977, 3 N. Moreover, the highest hardness value occurred for design two at 75.1 Shore D, and the highest average density lies in design three at 1.2 g/mm 3 . The study also showed that the lowest cost occurred in hybrid design three at $ 1.2 per item. Based on the present study, the GFRP reinforcement can extend the model's performance with affordable cost and retain figure eight from the failure.
29
Ans Al Rashid, Shoukat Alim Khan, Sami G. Al‐Ghamdi et al. · Journal of Materials Research and Technology · 2021 · 214 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17