Polymers · 2023 · 23 citations · 34 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsComposite MaterialsFiber-reinforced CompositesFlexural PropertiesPolymer CharacterizationPolymer CompositesPolymer StabilityFiber-reinforced Polymer CompositesFlexural StrengthFlexural Strength DevelopmentGlass Fiber Reinforced CompositesHemp FibersMechanical Strength Of PolymersPlant Fiber UtilizationPolypropylene
The growing demand for plant fiber-reinforced composites offers new opportunities to compete against glass fiber (GF)-reinforced composites, but their performance must be assessed, revised, and improved as much as possible. This work reports on the production and the flexural strength of composites from polypropylene (PP) and hemp strands (20-50 wt.%), using maleic anhydride-grafted PP (MAPP) as a compatibilizer. A computational assessment of the reaction between cellulose and MAPP suggested the formation of only one ester bond per maleic anhydride unit as the most stable product. We determined the most favorable MAPP dosage to be 0.06 g per gram of fiber. The maximum enhancement in flexural strength that was attained with this proportion of MAPP was 148%, corresponding to the maximum fiber load. The modified rule of mixtures and the assumption of similar coupling factors for tensile and flexural strength allowed us to estimate the intrinsic flexural strength of hemp strands as 953 ± 116 MPa. While falling short of the values for sized GF (2415 MPa), the reinforcement efficiency parameter of the natural fibers (0.209) was found to be higher than that of GF (0.045).
34
Structure of Cellulose Microfibrils in Primary Cell Walls from Collenchyma
Lynne H. Thomas, V. Trevor Forsyth, Adriana Šturcová et al. · PLANT PHYSIOLOGY · 2012 · 311 citations · Full text
Life Sciences, Botany, Plant Biology +17
Anand Ramesh Sanadi, R. A. Young, Craig Clemons et al. · Journal of Reinforced Plastics and Composites · 1994 · 175 citations
Natural Sciences, Materials Engineering, Materials Science +17