ACS Catalysis · 2023 · 27 citations · 78 references
Natural SciencesChemical EngineeringMaterials ScienceCatalysisElectrochemical EngineeringEnergy MaterialsCatalyst CharacterizationCatalytic MaterialsCatalytic Reaction EngineeringFuel Cell MaterialsFuel Cell MembranesFuel CellsCatalytic Energy ConversionFuel Cell CatalystsNitrogen Source UtilizationNon-precious Metal CatalystsOxygen Reduction CatalystsOxygen Reduction ReactionProton Exchange Membrane Fuel CellsProton Exchange Membranes
Fe–N–C material is regarded as a promising non-precious-metal catalyst for oxygen reduction reaction (ORR) to replace Pt-based catalysts, but its activity and mass transport remain problematic before a large-scale application in proton exchange membrane fuel cells (PEMFCs). Our previous research developed an Fe–N–C aerogel catalyst by pyrolyzing resorcinol–melamine–formaldehyde (RMF) aerogel containing iron precursors. The abundance of micro- and mesopores in aerogel is known to improve the mass transport properties of Fe–N–C cathodes in PEMFC, facilitating the diffusion of O 2 to the Fe–N 4 sites. Herein, to further improve the ORR activity while maintaining good mass transport properties, a series of Fe–N–C aerogel catalysts were synthesized by modulating the nitrogen source (melamine) content and the texture in the RMF aerogel precursor. The Fe content in catalysts presents a positive relationship with melamine content in the aerogel, with adequate texture, indicating the important function of nitrogen source in stabilizing Fe atoms during pyrolysis to form Fe–N 4 active sites. 57 Fe Mössbauer spectroscopy revealed a majority of O–Fe(III)N 4 C 12 configuration of the active sites, which is consistent with the variation of pyrrolic N content with Fe derived from X-ray photoelectron spectroscopy. As a result, the mass activity of the series of catalysts exhibits a linear relationship with Fe content and reaches 3.0 A g –1 at 0.8 V vs reversible hydrogen electrode (RHE) in 0.05 M H 2 SO 4 and rotating disk electrode (RDE) setup. Their performance in PEMFC exhibits the same tendency as the RDE setup. In addition, the H 2 /air PEMFC polarization curves do not show any diffusion-limited current density effects, even at 0.7 A cm –2, with a cathode based on an Fe–N–C catalyst prepared with high melamine content. This work reveals the importance of nitrogen sources to reach a high atomically dispersed Fe content in Fe–N–C catalysts with a low yield of Fe nanoparticles, and the mass transport properties in PEMFC are not affected by low mesopore volume for aerogel-based catalysts.
78
Co3O4 nanocrystals on graphene as a synergistic catalyst for oxygen reduction reaction
Yongye Liang, Yanguang Li, Hailiang Wang et al. · Nature Materials · 2011 · 5.4K citations · Full text