Numerical simulation study on the structure optimization of liquid separation device in supersonic separator

Abstract

The effect of the supersonic separator on the condensation characteristics and fluid separation efficiency is not clear, and the structure of the liquid separation device still has room for optimization. Therefore, based on the rear-swirl type supersonic separator, three kinds of drainage ports and three kinds of liquid collection tank structures were proposed. The supersonic flow and separation process was studied numerically under nine different combination structures. The influence of the drainage port’s length and width and the inclination of the liquid collection tank on the liquefaction and separation process were analyzed. The separation trajectory of condensation droplets and the influence of particle size on the separation efficiency were clarified. The results show that the liquid separation device structure of the Em-Attached wall type can take condensation and separation efficiency into account, and its separation effect is the best. The optimal size of the key components was obtained: the length of the drainage port is 150 mm, the width of the drainage port is 3 mm, and the inclination of the liquid collection tank is 14 °. The particle size of the condensation droplets is in the range of 2 μm to 6 μm.