2022 · 15 citations · 0 references
EngineeringChemical EngineeringMechanical EngineeringCombustionGreen ChemistryInternal Combustion EnginesCombustion In EnginesCombustion ProcessesEngine EfficiencyEngine EmissionsEngine PerformanceEngine Performance CharacteristicsAmmonia CombustionAmmonia EmissionsCombustion StabilityCompression RatioHydrogen CombustionSpark IgnitionSpark Ignition CombustionVariable Compression Ratio
Abstract Ammonia combustion in engines is a promising approach for decarbonization of the energy sector. If made from renewable energy sources, anhydrous “green” ammonia combustion results in zero net carbon dioxide emissions. As a renewable energy storage medium, green ammonia is superior to both compressed hydrogen and batteries for long term energy storage. Combustion of pure ammonia in spark-ignited engines is challenged by low laminar flame speeds and high required ignition energy. Partially converting ammonia to hydrogen and nitrogen through local decomposition is a practical method for enhancing ammonia flame speed and reactivity. This work experientially examines anhydrous ammonia/hydrogen combustion and emissions using a single-cylinder variable compression ratio engine over a range of operating conditions. The study finds that high combustion stability (CoV < 2%) and high efficiency (gITE > 40%) are both possible using only 5% volumetric H2 addition. Experimental results show that rich operation is favorable due to low NOx (< 100ppm) and N2O (∼20 ppm). Roughly 1% unburned NH3 was found in the exhaust, which increased during rich operation. Hydrogen addition decreased NH3 emissions and aided smooth operation while worsening NOx emissions. While ammonia displayed a high knock tolerance like natural gas, heat release analysis indicated that spark-assisted compression ignition combustion was achieved at advanced spark timing and elevated intake temperature. Initial range finding experiments and modeling presented in this work provide a basis for further investigation into the role of rich engine operation and in-cylinder turbulence to enhance ammonia combustion at low hydrogen blending levels.