Journal of the American Ceramic Society · 2022 · 20 citations · 44 references
Natural SciencesMaterials EngineeringMaterials ScienceBuilding MaterialsCeramic MaterialsCeramicsCeramic BiomaterialsCeramic TechnologyCeramic Toughening MechanismsPowder ProcessingSinteringStructural CeramicsBiomimetic Construction MaterialsCold Sintering ProcessCompressive StrengthFlexural StrengthPlastic Deformation BehaviorSintering BehaviorSolubilitySolute Solubility
Abstract Dense and strong calcite (CaCO 3 ) ceramics were prepared by room‐temperature cold sintering with the aid of water and high pressure of up to 900 MPa. Under atmospheric pressure, calcite is barely soluble in water. However, the microstructure evolution and stress‐strain analysis during cold sintering revealed that the dissolution‐precipitation, plastic deformation, and pressure‐solution‐creep mechanisms played a crucial role in the densification and mechanical robustness of calcite ceramics, which was attributed to the significantly enhanced solubility of calcite in water under high pressure. The calcite ceramic cold sintered under 900 MPa from micron powder exhibited the highest relative density of 92.1% and best mechanical properties with compressive strength, flexural strength, hardness, and Young's modulus of 276.5 MPa, 52.5 MPa, 1.64 GPa, and 53.7 GPa, respectively. The as‐prepared calcite ceramic was stronger and harder than most stones and cement, indicating its promising application as novel building and biomimetic materials. The present study also provides a new strategy for densifying ceramics with low solubility by cold sintering.
44
L. Niel Plummer, Eurybiades Busenberg · Geochimica et Cosmochimica Acta · 1982 · 1.8K citations
Sea Urchin Spine Calcite Forms via a Transient Amorphous Calcium Carbonate Phase
Yael Politi, Talmon Arad, Eugenia Klein et al. · Science · 2004 · 955 citations
Crosslinking ionic oligomers as conformable precursors to calcium carbonate
Zhaoming Liu, Changyu Shao, Biao Jin et al. · Nature · 2019 · 302 citations