ACS Applied Materials & Interfaces · 2022 · 38 citations · 49 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsEnergy MaterialsDielectric CeramicsElectrical Properties Of CeramicsEnergy Storage MaterialsBreakdown StrengthDense MicrostructureElectrical Breakdown StrengthEnergy Storage ApplicationsEnergy Storage CeramicsFrequency StabilityMicrostructureTape Casting
AgNbO3-based Pb-free antiferroelectric (AFE) ceramics have attracted increasing interest owing to their excellent potential in energy storage applications. Herein, a high recoverable energy storage density (Wrec) of 7.62 J/cm3 is realized in La-doped AgNbO3 ceramics prepared via tape casting. The high Wrec is attributed to high breakdown strength Eb of 380 kV/cm induced by dense microstructure as well as fine grain size and enhanced AFE stability stemming from M2 phase and reduced tolerance factor t. The high Wrec exceeding 6 J/cm3 was maintained in a wide temperature range of 20–150 °C and exhibited frequency stability with less than 8% variation in a range of 1–200 Hz. The discharge energy density Wd exhibited temperature stability at 30–110 °C with less than 9% variation. Our research provides a good method for producing AgNbO3-based ceramics having high energy storage performances.
49
Perovskite lead-free dielectrics for energy storage applications
Letao Yang, Xi Kong, Fei Li et al. · Progress in Materials Science · 2018 · 1.9K citations
Natural Sciences, Materials Engineering, Materials Science +13
Ultrahigh energy storage in superparaelectric relaxor ferroelectrics
Hao Pan, Shun Lan, Shiqi Xu et al. · Science · 2021 · 766 citations
Natural Sciences, Materials Engineering, Materials Science +17