Polymers · 2022 · 22 citations · 44 references
EngineeringMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringSensorsPolymer Thin FilmsPrinting TechniquesSoft SensorsStrain SensorsConductive InksFlexible ElectronicsFlexible Strain SensorsFlexible SubstratesPolydimethylsiloxane Device FabricationPrinted Strain SensorsStrain SensingStrain-sensing Materials
In the field of soft electronics, high-resolution and transparent structures based on various flexible materials constructed via various printing techniques are gaining attention. With the support of electrical stress-induced conductive inks, the electrohydrodynamic (EHD) jet printing technique enables us to build high-resolution structures compared with conventional inkjet printing techniques. Here, EHD jet printing was used to fabricate a high-resolution, transparent, and flexible strain sensor using a polydimethylsiloxane (PDMS)/xylene elastomer, where repetitive and controllable high-resolution printed mesh structures were obtained. The parametric effects of voltage, flow rate, nozzle distance from the substrate, and speed were experimentally investigated to achieve a high-resolution (5 µm) printed mesh structure. Plasma treatment was performed to enhance the adhesion between the AgNWs and the elastomer structure. The plasma-treated functional structure exhibited stable and long strain-sensing cycles during stretching and bending. This simple printing technique resulted in high-resolution, transparent, flexible, and stable strain sensing. The gauge factor of the strain sensor was significantly increased, owing to the high resolution and sensitivity of the printed mesh structures, demonstrating that EHD technology can be applied to high-resolution microchannels, 3D printing, and electronic devices.
44
A stretchable carbon nanotube strain sensor for human-motion detection
Takeo Yamada, Yuhei Hayamizu, Yuki Yamamoto et al. · Nature Nanotechnology · 2011 · 3.2K citations
3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs
David B. Kolesky, Ryan L. Truby, A. Sydney Gladman et al. · Advanced Materials · 2014 · 2.1K citations · Full text
Transfer printing by kinetic control of adhesion to an elastomeric stamp
Matthew Meitl, Zhengtao Zhu, Vipan Kumar et al. · Nature Materials · 2005 · 1.5K citations