Materials · 2022 · 10 citations · 19 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMaterials ChemistryDefects In CeramicsElectrical Properties Of CeramicsFerroelectric CeramicsMultiferroic MaterialsSinteringBulk Electrical ConductivityCompositional TuningConductivityDefect Formation In CeramicsElectrical Conductivity MeasurementsMultiferroic CeramicsMultiferroic OxidesP-type Conductivity
BiFeO3 is a multiferroic material with a perovskite structure that has a lot of potential for use in sensors and transducers. However, obtaining pure single-phase BiFeO3 ceramic with a low electrical conductivity via solid-state reactions remains a problem that limits its application. In this work, the suppression of secondary phases in BiFeO3 was studied by varying the compositional parameters and the sintering temperature. The addition of 1% Bi2O3 to the stoichiometric precursor mixture prevented the formation of secondary phases observed when sintering stoichiometric precursors. The pure phase ceramic had a p-type conductivity and a three-decade lower electrical conductivity as measured by impedance spectroscopy. Annealing of optimally synthesized material at different partial pressures of oxygen in an oxygen−nitrogen gas atmosphere showed that the reason for this type of conductivity lies in the high concentration of defects associated with oxygen. By annealing in various mixtures of nitrogen and oxygen, it is possible to control the concentration of these defects and hence the conductivity, which can go down another two decades. At a pO2 ≤10%, the conductivity is determined by intrinsic charge carriers in the material itself.
19
The ‘universal’ dielectric response
A.K. Jonscher · Nature · 1977 · 5.5K citations
Strong ferroelectric domain-wall pinning in BiFeO3 ceramics
Tadej Rojac, Marija Kosec, Bojan Budič et al. · Journal of Applied Physics · 2010 · 327 citations · Full text