Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · 2022 · 10 citations · 25 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsStructural MaterialsFatigueFracture MechanicsJoint StrengthStrength Of MaterialsStrength PropertiesTensile PropertiesAluminum Alloy JoiningAluminum AlloysClinchingFatigue FractureFretting WearStatic StrengthStatic Strength TestingWear Debris Analysis
Lightweight aluminum alloys are widely used in automotive structural parts. Clinching (press-joining) is one of the most promising alternatives to welding for joining aluminum alloys, and as the failure of the joint is mainly caused by fatigue, the fatigue properties of the clinched joints directly affect the reliability and safety of the connected specimens. To gain a deeper understanding of this phenomenon, the static mechanical and fatigue properties of Al7075 aluminum alloy single-lap clinched joints were studied using static strength and tensile-tensile fatigue tests. The F–N curves of the joints were fitted using a straight-line and three-parameter power function method. The fractured samples and wear scars were analyzed by scanning electron microscopy and energy-dispersive spectroscopy. The results showed that the neck of the clinched joint and the upper sheet near the joint experienced the highest degree of fatigue fracture, the fretting wear debris consisted mainly of alumina and metallic aluminum, and the fretting wear was of a mode that differed from the two modes identified in the literature that we have dubbed “upper sheet inter-sheet region fretting wear.”
25
Joining by plastic deformation
K. Mori, Niels Bay, Livan Fratini et al. · CIRP Annals · 2013 · 453 citations
Natural Sciences, Materials Engineering, Materials Science +11