Polymers · 2022 · 23 citations · 40 references
EngineeringMaterials EngineeringMaterials ScienceCombustionFunctional MaterialsPolymer EngineeringCombustion FundamentalsCombustion KineticsComposite MaterialsFire-resistant MaterialsNanocompositesThermogravimetric AnalysisEpoxy ResinsFlame RetardancyFlame RetardantsFlame Spread ModelingGlass Fiber Reinforced CompositesMaterial FlammabilityNumerical Combustion SimulationPyrolysis Kinetics
For the first time, next to the flammability tests (LOI, UL-94 HB, VBB, TGA), experimental tests and computer simulation have been conducted on the flame spread and combustion of glass fiber-reinforced epoxy resins (GFRER) with 6% graphene and 6% DDM-DOPO flame-retardant additives. The downward rates of flame spread (ROS) in opposed flow with oxidizer and the upward ROS along GFRER composites have been first measured as well as the distribution of temperature over the combustion surface of the composites with flame-retardant additives and without them. The LOI and UL-94 HB tests showed a reduction in the flammability of GFRER when flame retardants were added and predicted a higher effectiveness of DDM-DOPO compared to graphene. Adding DDM-DOPO resulted in increasing the rate of formation of the volatile pyrolysis products and their yield, indicating, together with the other data obtained, the gas phase mechanism of the flame retardant's action. Adding graphene resulted in an increase in the soot release on the burning surface and an increase in the amount of non-volatile pyrolysis products on the burning surface, reducing the amount of fuel that participated in the oxidation reactions in the gas phase. The developed numerical combustion model for GFRER with a DDM-DOPO additive, based on the action of DDM-DOPO as a flame retardant acting in the gas phase, satisfactorily predicts the effect of this flame retardant on the reduction in downward ROS over GFRER for 45-50% oxygen concentrations. The developed model for GFRER with graphene additive, based on a reduction in the amount of fuel and increase in the amount of incombustible volatile pyrolysis products when graphene is added, predicts with good accuracy downward ROS over GFRER depending on oxygen concentration.
40
Bernhard Schartel, A.I. Balabanovich, Ulrike Braun et al. · Journal of Applied Polymer Science · 2007 · 226 citations
Yuezhan Feng, Chengen He, Yingfeng Wen et al. · Composites Part A Applied Science and Manufacturing · 2017 · 196 citations
Natural Sciences, Materials Engineering, Materials Science +14
Xin Wang, Lei Song, Wiwat Pornwannchai et al. · Composites Part A Applied Science and Manufacturing · 2013 · 188 citations
Natural Sciences, Materials Engineering, Materials Science +17