Journal of Materials Research and Technology · 2022 · 11 citations · 41 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallurgyTribologyLubrication EngineeringSinteringTribological MaterialsWear-resistant MaterialsComposite Tribological MaterialsFrictionGlaze FormationGlaze OxidationHigh-temperature Mechanical BehaviorHigh-temperature Tribological MaterialsLubricant SelectionTemperature Effects On Friction
NiAl-based composites were fabricated in-situ using vacuum hot-press sintering technology. The Ti3AlC2, TiC and Ti3Al were formed during the sintering process, and the intensity of peaks grow higher with the addition of Al, Ti and C powder contents, respectively. The microhardness of the composites was significantly improved by adding these powders and gradually increased with the incremental content of Al, Ti and C powders. Meanwhile, the tribological properties of the composites at high temperature were also improved. The worn surface formed during the tribo-oxidation reactions and produced the glaze film in the high-temperature friction process, which could improve the composites' tribological properties. The TiO2 and Al2O3 phases were observed on the worn surface after the friction test, which could act as a high-temperature lubricant and improve the composites’ tribological properties.
41
Xingwang Cheng, Shenglin Li, Hongmei Zhang et al. · Journal of Alloys and Compounds · 2017 · 133 citations
Natural Sciences, Materials Engineering, Materials Science +12