ACS Energy Letters · 2022 · 98 citations · 49 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsElectrochemical EngineeringElectrochemistryCeramic ProcessingElectrode MaterialsElectrolyte MaterialsFuel Cell MaterialsFuel CellsSinteringCeramic ElectrolytesCoarseningElectrolytesFuel Cell ElectrodesMicrowave SinteringNanostructured ElectrodesNanostructured Fuel Cell MaterialsResistive Heating Effects
Protonic ceramic electrochemical cells (PCECs) have attracted considerable attention owing to their ability to reversibly convert chemical fuels into electricity at low temperatures below 600 °C. However, extreme sintering conditions during conventional convection-based heating induce critical problems for PCECs such as nonstoichiometric electrolytes and microstructural coarsening of the electrodes, leading to performance deterioration. Therefore, we fabricated PCECs via a microwave-assisted sintering process (MW-PCEC). Owing to the ultrafast ramping rate (∼50 °C/min) with bipolar rotation and the resistive heating nature of microwave-assisted sintering, undesirable cation diffusion and grain growth were effectively suppressed, thus producing PCECs with stoichiometric electrolytes and nanostructured fuel electrodes. The MW-PCEC achieved electrochemical performance in both in fuel cell (0.85 W cm–2) and in electrolysis cell (1.88 A cm–2) modes at 600 °C (70% and 254% higher than the conventionally sintered PCEC, respectively) demonstrating the effectiveness of using an ultrafast sintering technique to fabricate high-performance PCECs.
49
Readily processed protonic ceramic fuel cells with high performance at low temperatures
Chuancheng Duan, Jianhua Tong, Meng Shang et al. · Science · 2015 · 1.5K citations
Natural Sciences, Chemical Engineering, Materials Science +16
Lei Yang, Shizhong Wang, Kevin Blinn et al. · Science · 2009 · 1.2K citations
Natural Sciences, Materials Engineering, Materials Science +17
A general method to synthesize and sinter bulk ceramics in seconds
Chengwei Wang, Weiwei Ping, Qiang Bai et al. · Science · 2020 · 768 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +16