Electrochem · 2022 · 20 citations · 61 references
Natural SciencesMaterials EngineeringMaterials ScienceElectrochemical EngineeringEnergy MaterialsNanomaterialsElectrochemical CellsElectrochemical Energy StorageElectrode MaterialsNanocompositesNanostructured Energy MaterialsSupercapacitorsCarbon-based Electrode MaterialsCarbon-based ElectrodesCarbonization ProcessesCatalytic ActivityComposite Electrode MaterialsCurrent CollectorsNanoparticlesRate Capability
In this work, we report the synthesis of an active material for supercapacitors (SCs), namely α-Fe2O3/carbon composite (C-Fe2O3) made of elongated nanoparticles linearly connected into a worm-like morphology, by means of electrospinning followed by a calcination/carbonization process. The resulting active material powder can be directly processed in the form of slurry to produce SC electrodes with mass loadings higher than 1 mg cm−2 on practical flat current collectors, avoiding the need for bulky porous substrate, as often reported in the literature. In aqueous electrolyte (6 M KOH), the so-produced C-Fe2O3 electrodes display capacity as high as ~140 mAh g−1 at a scan rate of 2 mV s−1, while showing an optimal rate capability (capacity of 32.4 mAh g−1 at a scan rate of 400 mV s−1). Thanks to their poor catalytic activity towards water splitting reactions, the electrode can operate in a wide potential range (−1.6 V–0.3 V vs. Hg/HgO), enabling the realization of performant quasi-symmetric SCs based on electrodes with the same chemical composition (but different active material mass loadings), achieving energy density approaching 10 Wh kg−1 in aqueous electrolytes.
61
Matthias Thommes, Katsumi Kaneko, Alexander V. Neimark et al. · Pure and Applied Chemistry · 2015 · 19.8K citations
True Performance Metrics in Electrochemical Energy Storage
Yury Gogotsi, Patrice Simon · Science · 2011 · 2.4K citations
Recent advancements in supercapacitor technology
Waseem Raza, Faizan Ali, Nadeem Raza et al. · Nano Energy · 2018 · 1.9K citations