Wear of Mo- and W-alloyed TiAlN coatings during high-speed turning of stainless steel

Maiara Moreno, Jon M. Andersson, Mats Johansson, Birgit E. Friedrich, Robert Boyd, I.C. Schramm, L.J.S. Johnson, Magnus Odén, L. Rogström

Surface and Coatings Technology · 2022 · 21 citations · 37 references

DOIFull text

Open access

Concepts

Abstract

This study investigates the wear of W- and Mo-alloyed Ti1-x-yAlxMeyN coatings (Me = W, Mo) with x ≈ 0.55 and y ≈ 0.10 during high-speed turning of stainless steel 316L. A difference in the crater wear rate was observed between TiAlN and Ti1-x-yAlxMeyN coatings. The wear behavior in the sliding area is characterized in detail for two different regions by scanning and transmission electron microscopy and energy dispersive X-ray spectroscopy. A thin adhered layer constituted of elements from the workpiece material is observed on the top of all coatings, followed by diffusion of species from the stainless steel 316L into the coatings. Co from the cemented carbide substrate also diffuses through column boundaries of the coating. The temperature varies in the sliding area. The presence of Mo or W retards the spinodal decomposition and the formation of h-AlN as compared to TiAlN coatings, leading to lower crater wear rate in alloyed coatings.

References

37