Science and Technology of Welding & Joining · 2022 · 22 citations · 40 references
EngineeringMaterials EngineeringMaterials ScienceJoiningMechanical Behavior Of MaterialsMetallurgyAlloysFriction Stir WeldingJoining Of Dissimilar MaterialsMetalsWeldingWelding ProcessesAluminium AlloysFriction Stir Welding ProcessIntermetallic Compound FormationIntermetallic FormationMechanical Mixing EffectsTensile StrengthTitanium Alloy JoiningTitanium Alloys
Double side friction stir welding (DS-FSW) was used to join TC4 titanium alloy and 2024-T4 aluminium alloy having dissimilar medium-thick plates with a thickness of 8 mm. The microstructure and mechanical properties in medium-thick Ti/Al dissimilar DS-FSW joints were systematically studied. It revealed that the diffusion-type Ti/Al interface was mainly formed when the rotating speed is low. While intermetallic compounds layers were formed at the Ti/Al interface due to the high welding temperature and intense mechanical mixing at a relatively high rotating speed. The maximum tensile strength of medium-thick Ti/Al dissimilar DS-FSW joint is 265 MPa achieved at the rotation speed of 300 rev min –1 , which is 58.9% of the base material of 2024-T4 aluminium alloy.
40
Bo Li, Zhenhua Zhang, Yifu Shen et al. · Materials & Design (1980-2015) · 2013 · 160 citations
Engineering, Manufacturing Engineering, Materials Engineering +15
Formation process of the bonding joint in Ti/Al diffusion bonding
Yao Wei, Wu Aiping, Zou Guisheng et al. · Materials Science and Engineering A · 2007 · 154 citations