Crystals · 2022 · 14 citations · 30 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceElectrochemistryEnergy MaterialsAlloysAnode MaterialsBattery MaterialsCorrosion MechanismsElectrochemical CorrosionElectrode MaterialsAnode BehaviorCast AlloysCorrosion BehaviorDischarge CapacityElectrochemical BehaviorElectrochemical CharacterizationElectrochemical MeasurementsMagnesium Alloys
The microstructural characteristics of cast Mg-x Sn (x = 0.5, 1.0, 2.5 wt.% and 4.0 wt.%) alloys were systematically evaluated, as well as the electrochemical behavior and discharge properties in 3.5 wt.% NaCl solution. The micro-morphological results show that the grains are obviously refined and the Mg2Sn phase distribution is uniform with the increase of Sn content. In the four tested alloys, the effect of Sn content on the corrosion resistance of the alloys was found to be bidirectional by using the loss-in-weight method and electrochemical measurements. Among them, Mg-2.5Sn exhibits higher corrosion resistance in 3.5 wt.% NaCl solution. The decrease of the self-corrosion rate of Mg-x Sn alloy is mainly due to the formation of a SnO2 protective film, which inhibits the expansion of pitting corrosion. In addition, an appropriate amount of Mg2Sn can weaken the self-corrosion behavior. Mg-1Sn exhibits the highest anode efficiency and discharge capacity of 56.11% and 1245.72 mAh·g−1, respectively. Mg-0.5Sn shows the highest peak energy density, which is 1258.78 mWh·g−1.The maximum average discharge voltage of Mg-2.5Sn is 1.461 V.
30
Mg-Ca binary alloys as anodes for primary Mg-air batteries
Min Deng, Daniel Höche, Sviatlana V. Lamaka et al. · Journal of Power Sources · 2018 · 282 citations
Natural Sciences, Materials Engineering, Materials Science +14