The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · 2022 · 18 citations · 28 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMetallurgyPhase TransformationsAlloysCrystallization ProcessesGrain Structure FormationMicrostructure AnalysisMicrostructure EvolutionThermomechanical ProcessingAnnealingGrain Size ReductionGrain StructureGrain Structure EvolutionMicrostructural Evolution During AnnealingRecrystallizationRecrystallization BehaviorRecrystallization Microstructures
Two-step homogenisation was applied to a 6xxx alloy containing Zr to enhance the characteristics of Zr-bearing dispersoids and recrystallization resistance. The two-step homogenisation treatments were composed of a first step at 400 °C for 48 h and a second step at 500 °C for 2 and 5 h and compared with single-step homogenisation conducted at 500 °C for 2 and 5 h. The dispersoid microstructure was characterised using optical microscopy and scanning and transmission electron microscopies. The thermomechanical simulator Gleeble 3800 was used to conduct the hot compression tests at 350°C/1.0s−1. To study the recrystallization resistance, post-deformation annealing at 500 °C for 1 h was performed on the deformed samples. The grain structure after deformation and annealing was characterised based on the EBSD technique. The results showed that compared to single-step homogenisation, the dispersoid characteristics were significantly improved using two-step homogenization, where the number density of L12-Al3Zr dispersoids increased by 75–145% while their size decreased by 9–25% and the distribution of the DO22-(Al, Si)3(Zr,Ti) dispersoids became more uniform. The improved characteristics of Zr-bearing dispersoids and the narrower dispersoid-free zones produced by the two-step homogenization significantly improved the recrystallization resistance with a reduction in the recrystallized area fraction reached 85% when compared with single-step homogenisation.
28
Macrosegregation in direct-chill casting of aluminium alloys
R.K. Nadella, Dmitry Eskin, Qiang Du et al. · Progress in Materials Science · 2007 · 281 citations
Hot deformation and dynamic recrystallization in Al-Mg-Si alloy
Jiachen Li, Xiaodong Wu, Lingfei Cao et al. · Materials Characterization · 2021 · 220 citations
Natural Sciences, Materials Engineering, Materials Science +16
Effects of Er and Zr additions on precipitation and recrystallization of pure aluminum
Hongying Li, Zhaohe Gao, Hao Yin et al. · Scripta Materialia · 2012 · 151 citations