Rudarsko-geološko-naftni zbornik · 2022 · 12 citations · 29 references
EngineeringEarth SciencesGeologyEngineering GeologyGeotechnical EngineeringRock MechanicsIn-situ Stress MeasurementIn-situ TestingRock StrengthShear Strength Of RocksStress In RocksUnderground Opening StabilityGeomechanical PropertiesGeomechanical TestingIn Situ StressIn Situ Stress AnalysisIn-situ Stress CharacterizationIn-situ Stress EstimationStress EstimationUnit Weight
In-situ stress is one of the most important input data to study stability analysis of underground and surface geomechanical projects. The measured vertical stress has a linear relation with depth. The average value of unit weight (g) was obtained 0.026 MN/m3 (2.56 ton/m3) using 1041 test results of different rocks with 0.001 difference with 0.027 MN/m3 which is a reliable coefficient for estimating vertical stress. The ratio of horizontal (sh) to vertical (sv) stress (K =sh/sv) is estimated by theoretical and empirical methods. The results showed that the estimating ratio of horizontal to vertical stress (K) by a theoretical method such as Terzaghi and Richard is much smaller than 1, and the estimation of the K value utilizing empirical methods such as Hoek and Brady is much greater than 1, with its value even approaching 4 in the near ground surface. To overcome the lack of an applicable comprehensive relation for the estimation of the K ratio and improve the shortcomings of previous methods, a new empirical relation was developed to estimate the K ratio utilizing a significant number of in-situ test results. Stability analysis of Masjed Soleyman powerhouse caverns was carried out by numerical modelling for five values of the K ratio obtained by previous stress estimation methods and this study. The in-situ stress estimation method (K ratio changes) showed a significant effect on stresses, displacements, strains, depth of the plastic zone and significantly affect the stability analysis and support system design of the powerhouse and transformer caverns.
29
Haoyu Han, Daisuke Fukuda, Hongyuan Liu et al. · International Journal of Rock Mechanics and Mining Sciences · 2020 · 134 citations · Full text