IEEE Transactions on Circuits & Systems II Express Briefs · 2022 · 16 citations · 12 references
EngineeringElectrical EngineeringEnergy SystemsRenewable Energy SystemsSensorsPhotovoltaic DevicesPower Electronics For Renewable EnergyRenewable Energy Power ConversionSolar CellsSolar Energy SystemsSolar Photovoltaic SystemsEnergy HarvestingEnergy Harvesting SystemsMaximum Power Point TrackingMaximum Power Point Tracking AlgorithmsPhotovoltaic Energy SystemsPhotovoltaic SystemsSolar Photovoltaic EnergyVoltage
A photovoltaic (PV) energy harvesting system with 2-Dimensional Fast Maximum Power Point Tracking (2-D FMPPT), based on the hill climbing (HC) MPPT technique is proposed. The 3-step MPPT modes for the energy harvesting system are employed to obtain KVOC that is independent of environmental effects such as irradiance and radiated temperature. The system consists of a dynamic peak transducer power sensor (DPTPS), Coarse (1st) FMPPT mode, Ton Increment/Decrement Mode, Fine (2nd) mode, MPPT logics, and a controller. The system can handle a voltage range of 0.5 V to 2.4 V and a power range of 1.4 mW to 119 mW. A peak MPPT efficiency of 99.4% and over 96.1% MPPT efficiency in 1 k to 50 k illuminance are achieved. The proposed system is fabricated on 0.18- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu m$ </tex-math></inline-formula> CMOS process and occupies an active area of 1.4 mm2.
12