All Inkjet-Printed Temperature Sensors Based on PEDOT:PSS

Ayatallah M. Khalaf, Hanady H. Issa, José Luis Ramírez, Shaimaa A. Mohamed

IEEE Access · 2022 · 31 citations · 17 references

DOIFull text

Open access

Concepts

Abstract

This paper develops a simple, cost-effective, fully Inkjet-printed flexible temperature sensor with easy fabrication steps using PiXDRO LP50 inkjet printer. The thermistor sensor employed a Poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT: PSS) as a temperature-sensitive layer with silver nanoparticles (AgNps) as a contact electrode. The sensor performance was evaluated on different dimensions and types of substrates. Epson Glossy paper with 255 μm thickness and Polyimide (Kapton HN) with 50 μm thickness were used over temperatures ranging from room temperature up to 50 °C and 90 °C for paper and Kapton substrates, respectively. The sensor developed over Glossy paper showed the best sensitivity of -1.67 %/°C in the chosen temperature range while the sensor showed +0.113%/°C on PI substrate.

References

17