Advances in Materials and Processing Technologies · 2022 · 44 citations · 30 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsTribologyAbrasive WearAlloysComposite MaterialsMetal Matrix CompositesMetalsWear-resistant MaterialsComposite Wear BehaviorFriction Coefficient AnalysisHybrid CompositesMaterial Wear AnalysisWearWear Rate MeasurementWear TestingWear-resistant Alloys
Hybrid Metal Matrix Composites are rising in demand to satisfy advanced technological applications due to their improved mechanical and wear properties. In the present work, a sand moulding process is used to develop the Ni-Cu alloy hybrid metal matrix composites (HMMCs) reinforced with aluminium oxide (Al2O3) and titanium dioxide (TiO2) particles. According to ASTM standard, the fabricated Ni-Cu alloy HMMCs undergo microstructure and tribological evaluation. In this study, tribological properties like wear and coefficient of friction analysis are performed on a pin-on-disc wear testing machine with varying (200, 300 and 400 rpm) speeds (20, 30 and 40 N), loads (1 m/sec), sliding velocity. Micrographic images show fairly uniform distribution of the reinforced elements Al2O3 and TiO2 in the Ni-Cu alloy matrix. An analysis of EDS and XRD reveals the presence of reinforced particulate matter in the Ni-Cu alloy matrix. The wear rate of hybrid composites (0.000366 mm3/N-m) is found to decrease (25%) with an increase in 9 wt. % of TiO2/Al2O3 reinforcement when compared to the base alloy (0.000828 mm3/N-m). It can be observed that the addition of Al2O3 and TiO2 particulates in the base alloy nickel, it’s reduced the co-efficient of friction (0.78) at various loads and speeds.
30
Aluminium matrix composites: Challenges and opportunities
M.K. Surappa · Sadhana · 2003 · 1.2K citations
Natural Sciences, Materials Engineering, Materials Science +12
Seyed Abdolkarim Sajjadi, H.R. Ezatpour, M. Torabi Parizi · Materials & Design (1980-2015) · 2011 · 624 citations
Natural Sciences, Materials Engineering, Materials Science +15