Inorganics · 2022 · 13 citations · 26 references
Natural SciencesMaterials EngineeringMaterials ScienceCatalysisInorganic ChemistryMaterials ChemistryCatalyst PreparationCatalytic MaterialsLuminescent MaterialsPhotocatalysisPhotochemical SynthesisPhotochemistryCatalytic ActivityCatalytic Activity EnhancementCo-precipitationDegradationDye DegradationMesoporous MaterialsPhotocatalytic DegradationPhotocatalytic Materials
The co-precipitation method was employed to synthesize a set of ZnAl hydrotalcite materials modified by Cu2+. The synthesized materials have a similar lamellar structure to that of hydrotalcite. The distance between layers is in the range of 7.73–8.56 Å. The network parameters a and c ranged from 3.058 to 3.074 Å and from 23.01 to 24.44, respectively. According to the IUPAC classification, the composites possess a mesoporous structure which belongs to class IV, type H 3. Particularly, the absorption edge shifts strongly to the visible light region when increasing the molar ratio of Cu2+ in the samples from 0 to 3.5. The photocatalytic activity of the synthetic materials was evaluated through the degradation efficiency of rhodamine-B (Rh-B) in the water and colorants in textile wastewater. The present study was the first to synthesize a material sample that contains a molar ratio of Cu2+ in the range of 2.5–3.5 and has high catalytic activities. They were able to degrade Rh-B at a high concentration (100 ppm) with a conversion rate of approximately 90% after 240 min of irradiation using a 30 W LED light. The catalytic activity of the composites depends on the molar ratio of modified Cu2+, the value of environmental pH, the H2O2 concentration and the irradiation time.
26
F.Z. Mahjoubi, Abderrahim Khalidi, Mohamed Abdennouri et al. · Journal of Taibah University for Science · 2015 · 258 citations · Full text
Siew Siang Lee, Hongwei Bai, Zhaoyang Liu et al. · Water Research · 2013 · 204 citations · Full text
Natural Sciences, Chemical Engineering, Materials Science +17
Kulamani Parida, Lagnamayee Mohapatra, N. Baliarsingh · The Journal of Physical Chemistry C · 2012 · 174 citations
Natural Sciences, Materials Engineering, Materials Science +17