RSC Advances · 2022 · 10 citations · 28 references
EngineeringChemical EngineeringElectrochemical EngineeringElectrochemistryThermal AnalysisBattery MaterialsBattery TechnologyBattery TestingElectrochemical CellsElectrochemical Energy StorageEnergy StorageBattery Cycle LifeBattery Cycle Life TestingBattery Thermal TestingCycle LifeInternal ResistanceResidual Capacity AssessmentResidual Capacity EvaluationTest Protocol Development
(LFP) batteries using traditional methods, and found that the remaining capacity of retired LFP batteries has a strong correlation with their internal resistance. This result helped us to propose a rapid and elementary classification method for the calibration of the remaining capacity, and to then formulate a test protocol seeking to balance the time spent and the test cost. Besides, the cut-off voltage and charge-discharge current density have a significant impact on the calibration of the remaining capacity, especially for retired LFP batteries with low residual capacity. In the cycle life test and temperature reliability evaluation process, the results demonstrate that the retired LFP batteries have a good service life when under a lower current of charge/discharge, and the capacity reductions were 2.3%, 11.2% and 4.8% for retired LFP batteries with 80% state of health (SOH), 70% SOH and 60% SOH, respectively, after 500 cycles. Finally, considering the temperature reliability, voltage consistency and large current cycling performance of retired LFP batteries, there are still many challenges in their future echelon utilization.
28