Proceedings of SPE Formation Damage Control Symposium · 1990 · 22 citations · 0 references
EngineeringPetroleum EngineeringHydraulic FracturingPolymer ChemistryRheologyFracture ConductivityPolymer StabilizationBreakersFracture Conductivity AssessmentGelling BehaviorHydraulic Fracturing FluidsProppant Pack PermeabilityProppant PermeabilityProppant Permeability DamageViscosity
The permeability of proppant-packs may be significantly damaged by the gelling agents commonly used in hydraulic fracturing fluids. Several recent fracture conductivity studies have sought to quantify the damage caused by these treatment fluids over a wide range of environmental conditions. Very little, however, has been disclosed in the way of viable methods of minimizing or cleaning up the proppant-pack damage.Breakers, both oxidative and enzymatic, have been recognized for many years as useful for degrading the viscosity of polymeric treatment fluids. The prevailing assumption was that breaking the treating fluid to a non-viscous state was sufficient to provide for the proppant-pack clean-up upon flowback. Recent studies have illustrated that the permeability is significantly impaired by the polymer residue even though sufficient breaker concentrations have been added to effectively reduce the fluid viscosity.In this study, the concentrations of a commonly used oxidative breaker which are required to significantly reduce the proppant-pack permeability damage caused by polymeric treating fluids were determined. The fluids which were evaluated were based upon natural guar, derivatized guar (HPG), and hydroxyethyl cellulose (HEC).The long-term proppant-pack permeability testing was performed using a modified API-type fracture conductivity cell which permitted fluid loss through two, ten square-inch cores. The test temperature was 160°F, which is believed to be below the range at which effective thermal degradation occurs.Test results indicate that proppant-pack damage can be significantly reduced by the addition of elevated breaker concentrations. An understanding of the effects of breaker concentration on proppant-pack damage can be very useful in the effective design of fracturing treatments.