Proceedings of SPE Annual Technical Conference and Exhibition · 1993 · 38 citations · 0 references
EngineeringCivil EngineeringPetroleum EngineeringDrillingDrilling EngineeringGeotechnical EngineeringDirectional DrillingDrilling EquipmentDrilling MechanicsDrilling OperationsDownhole Data AcquisitionDownhole InstrumentationDownhole MonitoringDrilling Measurement SystemsDrillstring DynamicsDrillstring MechanicsField Pilot TestingMeasurement While Drilling
Development and Field Testing of a New Downhole MWD Drillstring Dynamics Sensor S.A. Zannoni; S.A. Zannoni Sperry-Sun Drilling Services Search for other works by this author on: This Site Google Scholar C.A. Cheatham; C.A. Cheatham Sperry-Sun Drilling Services Search for other works by this author on: This Site Google Scholar C-K.D. Chen; C-K.D. Chen Sperry-Sun Drilling Services Search for other works by this author on: This Site Google Scholar C.A. Golla C.A. Golla Sperry-Sun Drilling Services Search for other works by this author on: This Site Google Scholar Paper presented at the SPE Annual Technical Conference and Exhibition, Houston, Texas, October 1993. Paper Number: SPE-26341-MS https://doi.org/10.2118/26341-MS Published: October 03 1993 Cite View This Citation Add to Citation Manager Share Icon Share Twitter LinkedIn Get Permissions Search Site Citation Zannoni, S.A., Cheatham, C.A., Chen, C-K.D., and C.A. Golla. "Development and Field Testing of a New Downhole MWD Drillstring Dynamics Sensor." Paper presented at the SPE Annual Technical Conference and Exhibition, Houston, Texas, October 1993. doi: https://doi.org/10.2118/26341-MS Download citation file: Ris (Zotero) Reference Manager EasyBib Bookends Mendeley Papers EndNote RefWorks BibTex Search Dropdown Menu nav search search input Search input auto suggest search filter All ContentAll ProceedingsSociety of Petroleum Engineers (SPE)SPE Annual Technical Conference and Exhibition Search Advanced Search AbstractThe development and field testing of a new three-axis shock and vibration MWD sensor are presented. The sensor is shown to have the capability to detect harmful BHA dynamic conditions such as whirling, lateral BHA shocks, stick-slip, and bit bounce by measuring the changes in acceleration in the axial, tangential, and radial directions. Interpretations of these conditions have improved insight into the drilling process and are expected to result in improved drilling efficiency.IntroductionPrevious work has shown that harmful drillstring motions can cause whirl, lateral BHA shocks, stick-slip, and bit bounce. Dubinsky et al. [1] provide an excellent source for the practical applications which would be obtained by a reduction in harmful drillstring dynamic motions. It also contains a very useful glossary of terms for drillstring dynamics.Although the downhole dynamic environment is not fully understood, the literature is rife with examples of the increased drilling costs that are caused by harmful drillstring motions due to downhole failure of BHA components (such as MWD tools, motors, drill collars, and bits) and reduced rate of penetration [2 - 5]. The remainder of this section discusses the salient aspects of these previous papers which guided our sensor development.BHA WhirlLarge dynamic bending moments were measured in the BHA during field tests which were conducted by Shell Oil Company and NL [6]. These large bending vibrations were shown to be caused by drill collar procession, or "whirl". Vandiver et al. analyzed these same field data and identified both forward and backward whirl [7]. They discussed the possible deleterious effects of forward whirl (drill collar wear) and backward whirl (connection fatigue). They stated that bending, or lateral, vibrations are not transmitted to the surface by the drillstring. Their conclusions were that a downhole sensor that provides a measure of the bending motions of the BHA would hold great promise for providing real-time operational information on drill collar whirling.Bit WhirlBrett et al. showed that the most harmful PDC bit vibrations can be attributed to bit whirl [4]. This phenomenon is caused by the instantaneous center of rotation moving around the face of the bit. "Cutters on a whirling bit can move sideways, backwards, and much faster than those on a non-whirling bit". The impact loads cause cutters to chip which accelerates wear. Severe PDC bit damage is demonstrated to be possible after only short periods of time if it spins backwards in relatively hard rock.They stated that a whirling bit drills an overgauge hole while a true drilling (i.e., not whirling) bit drills a gauge hole.P. 269^ Keywords: lateral shock, whirl, sensor, field testing, new downhole mwd, bit selection, bha, bit bounce, spe 26341, downhole rpm Subjects: Drillstring Design, Drill Bits This content is only available via PDF. 1993. Society of Petroleum Engineers You can access this article if you purchase or spend a download.