Chemistry of Materials · 2000 · 621 citations · 33 references
Natural SciencesChemistryMaterials ScienceMaterials CharacterizationMaterials ChemistrySolid-state ChemistryCoordination ChemistryCrystal ChemistryInorganic MaterialsAmorphous CarbonBulk Material CharacterizationCarbon MaterialsPowder CharacterizationPowder SynthesisSolid-state Reaction Synthesis
Carbon nitride powder was synthesized by solid‑state reaction of cyanuric chloride (or its fluoro analogue) with lithium nitride, and its graphite‑like sp² structure of s‑triazine rings was confirmed by FT‑IR, Raman, UV‑vis, 13C MAS‑NMR, XPS, TGA/DTG, and Py‑EI‑MS. Elemental analysis shows an N/C ratio of 1.33, matching C3N4 stoichiometry, while SEM and XRD reveal an amorphous material that becomes more ordered layered graphitic under high pressure, and the gram‑scale, stoichiometric a‑C3N4 produced by this low‑cost route enables extensive studies of its bulk processing, electromechanical properties, and high‑pressure transformations into superhard crystalline phases.
Carbon nitride powder has been prepared by solid-state reaction between cyanuric chloride or its fluoro analogue and lithium nitride. The determined, by elemental analysis, atomic N/C ratio (1.33) in the synthesized material is entirely consistent with the C3N4 stoichiometry. Combined material characterization data, obtained by Fourier transform infrared, Raman, UV−visible, (13C) magic-angle spinning NMR, X-ray photoelectron spectroscopy, thermal gravimetric analysis/differential thermal analysis, and pyrolysis−electron ionization mass spectrometry methods, provide substantial evidence for graphite-like sp2-bonded structure composed of building blocks of s-triazine rings bridged by the 3-fold coordinated nitrogen atoms in the bulk carbon nitride. As indicated by X-ray and scanning electron microscopy analytical data, the material is amorphous and changes from turbostratic to more ordered layered graphitic morphology under high pressures. The availability of stoichiometric carbon nitride a-C3N4 in gram quantities, made possible by a developed low-cost synthetic method, facilitates the extensive studies of bulk processing and electromechanical properties, and high-pressure/high-temperature transformations of this material into superhard crystalline polymorphic phases.
33
Prediction of New Low Compressibility Solids
Amy Liu, Marvin L. Cohen · Science · 1989 · 2.7K citations
Natural Sciences, Materials Engineering, Materials Science +15
High Resolution XPS of Organic Polymers
G. Beamson · Analytica Chimica Acta · 1992 · 1.7K citations
Natural Sciences, Materials Engineering, Materials Science +9
A silicoboron carbonitride ceramic stable to 2,000°C
Ralf Riedel, Andreas Kienzle, Lutz Ruwisch et al. · Nature · 1996 · 726 citations
Natural Sciences, Materials Engineering, Materials Science +7